Back Ordered Do Not Order
	Quantity in Basket: none Code: PS-6360 Price:$0.00 Volume Price Quantity Price Each 1-2 $40.95 3+ $38.66 Shipping Weight: 0.00 pounds
	Terminal: Nut and Bolt F2 .250" Width Fast On
	Quantity:
General Specifications Dimensions: Length 6.25 inches 159 millimeters Width 3.35 inches 85 millimeters Height 6.50 inches 165 millimeters Height over Terminals 6.95 inches 176 millimeters Approximate Weight 13.80 pounds 6.20 kilograms Terminals: "F2" Quick disconnect tabs (0.250" x 0.032") "NB" Nut and bolt connector Case: ABS Plastic Electrical Specifications Nominal Voltage: 6 Volts (3 cell in series) Nominal Capacity: 20 hour rate (1800mA to 5.25 volts) 36.0 AH 10 hour rate (3200mA to 5.25 volts) 32.0 AH 5 hour rate (5600mA to 5.10 volts) 28.0 AH 1 hour rate (21A to 4.50 volts) 21.0 AH Energy Density (20 hour rate) 1.59 Watt-hours/cubic inch 96.9 Watt-hours/l Specific Energy (20 hour rate) 15.7 Watt-hours/pound 34.8 Watt-hours/kg Internal Resistance (Fully Charged Battery) 10 milliohms (approx.) Charging Cycle Applications: Limit initial current to 7200mA. Charge until battery voltage (under charge) reaches 7.20 to 7.35 volts at 68º F (20º C). Hold at 7.20 to 7.35 volts until current drops to approximately 360mA. Battery is fully charged under these conditions, and charger should either be disconnected or switched to "float" voltage. "Float" or "Stand-by Service": Hold battery across constant voltage source of 6.75 to 6.90 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition.