Charging
Cycle Applications: Limit
initial current to 460mA. Charge until battery voltage (under charge)
reaches 14.40 to 14.70 volts at 68º F (20º C). Hold at 14.40 to 14.70
volts until current drops to approximately 23mA. Battery is fully charged
under these conditions, and charger should either be disconnected or
switched to "float" voltage.
"Float" or "Stand-by Service": Hold battery
across constant voltage source of 13.50 to 13.80 volts continuously. When
held at this voltage, the battery will seek its own current level and
maintain itself in a fully charged condition. |