|
General Specifications |
| Dimensions: |
|
Length
|
9.04 inches
|
230 millimeters
|
|
Width
|
5.45 inches
|
138 millimeters
|
|
Height
|
8.15 inches
|
207 millimeters
|
|
Height over Terminals
|
8.98 inches
|
228 millimeters
|
|
Approximate Weight
|
41.10 pounds
|
18.70 kilograms
|
| Terminals: |
NB, U, AP, M, B
|
| Case: |
ABS Plastic
|
|
Electrical Specifications |
| Nominal Voltage: |
12 Volts (6 cell in series)
|
| Nominal Capacity: |
|
20 hour rate
|
(2.75A to 10.50 volts)
|
55.0 AH
|
|
10 hour rate
|
(4.90A to 10.50 volts)
|
49.0 AH
|
|
5 hour rate
|
(8.80A to 10.20 volts)
|
44.0 AH
|
|
1 hour rate
|
(33A to 9.00 volts)
|
33.0 AH
|
| Energy Density (20 hour rate) |
1.66 Watt-hours/cubic inch
|
101.4 Watt-hours/l
|
| Specific Energy (20 hour rate) |
16.1 Watt-hours/pound
|
35.4 Watt-hours/kg
|
| Internal Resistance (Fully
Charged Battery) |
10.2 milliohms (approx.)
|
Charging
Cycle Applications: Limit initial current
to 11A. Charge until battery voltage (under charge)reaches 14.40 to 14.70
volts at 68º F (20º C). Hold at 14.40 to 14.70 volts until currentdrops to
approximately 550mA. Battery is fully charged under these conditions, and
charger shouldeither be disconnected or switched to "float" voltage.
"Float" or "Stand-by Service": Hold battery
across constant voltage source of 13.50 to 13.80volts continuously. When
held at this voltage, the battery will seek its own current level and
maintain itself in a fully charged condition. |
|
