Case Qty. of 5 Rhino 12 Volt 7.0 Ah SLA Batteries With F2 Terminals
	Quantity in Basket: none Code: SLA-7-12F2-CASE Price:$64.10 Shipping Weight: 30.00 pounds
	Quantity:
General Specifications  Dimensions: Length 5.94 inches 151 millimeters Width 2.56 inches 65 millimeters Height 3.70 inches 94 millimeters Height over Terminals 3.86 inches 98 millimeters Approximate Weight 5.75 pounds 2.60 kilograms  Terminals: Quick disconnect tabs (0.250" x 0.032")  Case: ABS Plastic Electrical Specifications  Nominal Voltage: 12 Volts (6 cell in series)  Nominal Capacity: 20 hour rate (350mA to 10.50 volts) 7.0 AH 10 hour rate (650mA to 10.50 volts) 6.5 AH 5 hour rate (1100mA to 10.20 volts) 5.5 AH 1 hour rate (4200mA to 9.00 volts) 4.2 AH  Energy Density (20 hour rate) 1.49 Watt-hours/cubic inch 91.0 Watt-hours/l  Specific Energy (20 hour rate) 14.6 Watt-hours/pound 32.2 Watt-hours/kg  Internal Resistance (Fully Charged Battery) 22 milliohms (approx.) Charging Cycle Applications: Limit initial current to 1400mA. Charge until battery voltage (under charge) reaches 14.40 to 14.70 volts at 68� F (20� C). Hold at 14.40 to 14.70 volts until current drops to approximately 70mA. Battery is fully charged under these conditions, and charger should either be disconnected or switched to "float" voltage. "Float" or "Stand-by Service": Hold battery across constant voltage source of 13.50 to 13.80 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition.