PS-670 Please Use SLA-7-6
	Quantity in Basket: none Code: PS-670 Price:$0.00 Shipping Weight: 2.80 pounds Yuasa Cross: NP7-6 Warranty: 1 Year Design Life: 3 - 5 Years SLA Charger: PSC-6300A Chemistry: Sealed Lead Acid Volts: 6 Volts Ships: 1 - 2 Business Days
	Quantity:
General Specifications Dimensions: Length 5.95 inches 151 millimeters Width 1.34 inches 34 millimeters Height 3.70 inches 94 millimeters Height over Terminals 3.86 inches 98 millimeters Approximate Weight 2.94 pounds 1.33 kilograms Terminals: Quick Disconnect Tabs (0.187"x0.032") Case: ABS Plastic Electrical Specifications Nominal Voltage: 6 Volts (3 cell in series) Nominal Capacity: 20 hour rate (350mA to 5.25 volts) 7.0 AH 10 hour rate (640mA to 5.25 volts) 6.4 AH 5 hour rate (1150mA to 5.10 volts) 5.8 AH 1 hour rate (4100mA to 4.50 volts) 4.1 AH Energy Density (20 hour rate) 1.42 Watt-hours/cubic inch 87.0 Watt-hours/l Specific Energy (20 hour rate) 14.3 Watt-hours/pound 31.6 Watt-hours/kg Internal Resistance (Fully Charged Battery) 15 milliohms (approx.) Charging Cycle Applications: Limit initial current to 1400mA. Charge until battery voltage (under charge) reaches 7.20 to 7.35 volts at 68º F (20º C). Hold at 7.20 to 7.35 volts until current drops to approximately 70mA. Battery is fully charged under these conditions, and charger should either be disconnected or switched to "float" voltage. "Float" or "Stand-by Service": Hold battery across constant voltage source of 6.75 to 6.90 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition.